Hi
As soon as I save the settings, the color disappears in the G-Code display. It doesn't matter if I press the save settings button, use a macro, or update the tool length during probing. Version 1.2117.
PRO.jpg shows the difference before and after saving.
Screen.jpg shows the result after saving.
Multicam3000.pro is the damaged profile, and Multicam3000 OK.pro is before saving.
thanx
Andy Goodman
Color disappears in the G-Code display.
5 posts
• Page 1 of 1
Color disappears in the G-Code display.
by Andygoodman » Tue Mar 11, 2025 11:03 am
- Attachments
-
-
-
Multicam3000.pro- (47.03 KiB) Downloaded 164 times
-
- Multicam3000 OK.pro
- (47.02 KiB) Downloaded 162 times
- Andygoodman
- Posts: 9
- Joined: Sat Dec 14, 2019 9:55 am
Re: Color disappears in the G-Code display.
by cncdrive » Thu Mar 13, 2025 5:06 pm
I have checked and it saves without problems at me.
- cncdrive
- Site Admin
- Posts: 5158
- Joined: Tue Aug 12, 2014 11:17 pm
Re: Color disappears in the G-Code display.
by Andygoodman » Thu Mar 13, 2025 9:22 pm
ok, Well, we have several other machines without this problem. Can you check this profile to see if it is corrupted?"
- Andygoodman
- Posts: 9
- Joined: Sat Dec 14, 2019 9:55 am
Re: Color disappears in the G-Code display.
by cncdrive » Fri Mar 14, 2025 8:11 am
I tried to save it using the profile you uploaded and it saves without any problems.
- cncdrive
- Site Admin
- Posts: 5158
- Joined: Tue Aug 12, 2014 11:17 pm
Re: Color disappears in the G-Code display.
by Andygoodman » Tue Mar 18, 2025 3:47 pm
Ok, I'll try a reinstallation and add the profile again.
- Andygoodman
- Posts: 9
- Joined: Sat Dec 14, 2019 9:55 am
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest