I just received an UCR201 to replace a different pendant that quit working.
I use Ger 2022 screenset
I'm trying to program the F1 button and F2 button to use the Calibrate Tool Setter (20522) and Z Auto Zero (20523) on the 2022 screenset, but when I restart and try either one, it stops with an error of:
plate thickness <0
I have, and have had for years, the plate thickness set in the probe/settings screen as well as the position of the reference plate
I might also add that I just installed v 1.2116 over 1.2115 and verified that those settings are still there. Also the Calibrate Tool Setter and Z Auto Zero work correctly from the screenset itself, just not through the UCR201