Change background color on Gerry's 2017 screen

If you created a new screenset and want to share it with others then please post it here. You can talk about screens here.

Change background color on Gerry's 2017 screen

Postby George M » Fri Apr 23, 2021 1:15 pm

I use Gerry's 2017 screenset. On the screen that shows the gcode (on the Run screen) the font is white and the background is white and the highlight is light blue. Therefor the code is unreadable and just barely readable on the highlighted section. Can anyone point me to where I can change the background and font color for this screen?
Thank you
George M

DIY CNC Machine
UCCNC
UC300eth-LPT5
UCBB
George M
 
Posts: 52
Joined: Mon Apr 29, 2019 6:49 pm

Re: Change background color on Gerry's 2017 screen

Postby Robertspark » Fri Apr 23, 2021 1:18 pm

you will have to edit the background image using image editing software
inkscape
gimp
both very good and free and a lot of walkthroughs online
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: Change background color on Gerry's 2017 screen

Postby ger21 » Fri Apr 23, 2021 2:20 pm

Go to the Settings page and change the font color for interpretable g-codes. Click on the colored square and a color picker will open. Save Settings and restart. I use Black for the g-code color.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Change background color on Gerry's 2017 screen

Postby George M » Sat Apr 24, 2021 1:41 pm

Thanks.
Thank you
George M

DIY CNC Machine
UCCNC
UC300eth-LPT5
UCBB
George M
 
Posts: 52
Joined: Mon Apr 29, 2019 6:49 pm


Return to Custom Screensets

Who is online

Users browsing this forum: No registered users and 2 guests