forum.cncdrive.com

I reinstalled UCCNC to a different computer (the old computer just died),
Everything works ok except the screen flashes on and off. The tool path window does not flash but the rest of the screen does. what can I do to fix this problem.
Thanks

We have never heard about such kind of problem, so I cannot give you an advice about how to fix it, sorry.
It must be somekind of opengl issue, so try to install the most up to date graphics card driver from your graphics card manufacturer's website.

I have a similar problem.
I start the program, load a file, all works good for some minutes and then all the buttons and tabs disapear. I can still click on them if I know their position.
Someties I get graphics driver crashes. I use an AMD RX480 card with newest drivers.
Check the video in the link to see what I am talking about.

https://photos.app.goo.gl/mqvj9ETmnBkasWPX6

I use UCCNC 1.2112 in this video, Windows 10 with latest updates.
Version 1.2111 is even more unstable for me. Crashes the driver faster and stutters more.

did you ever get a resolution mine is doing the same thanks Alan

Try update your video card drivers of your computer.