2.116 - Probe doesnt stop immediately on touch

If you think you've found a bug post it here.

2.116 - Probe doesnt stop immediately on touch

Postby MRob » Wed Jun 05, 2024 5:54 pm

Tested in 2.116, using either my own probing macro or the built in probe screen, tool keeps moving for a fraction of a second after contact, makes my whole machine flex. Tested with both my Z, B and C axis, no debounce or anything like that. Reverting to 2.113 solved it, can run the probing macro at 300x feed without any issues. Pretty sure this is a bug, and not just something set wrong, but open to correction.
MRob
 
Posts: 45
Joined: Wed Dec 04, 2019 10:10 pm

Re: 2.116 - Probe doesnt stop immediately on touch

Postby cncdrive » Wed Jun 05, 2024 8:28 pm

Yes, this is a bug (probe axis overruns sometimes and instant stops), was already reported a few weeks ago and we already debugged and fixed it, will be fine in 1.2117.
cncdrive
Site Admin
 
Posts: 4780
Joined: Tue Aug 12, 2014 11:17 pm

Re: 2.116 - Probe doesnt stop immediately on touch

Postby MRob » Thu Jun 06, 2024 1:51 am

Good to know, thanks for confirming.
MRob
 
Posts: 45
Joined: Wed Dec 04, 2019 10:10 pm

Re: 2.116 - Probe doesnt stop immediately on touch

Postby Delco » Sun Jun 09, 2024 5:26 am

cncdrive wrote:Yes, this is a bug (probe axis overruns sometimes and instant stops), was already reported a few weeks ago and we already debugged and fixed it, will be fine in 1.2117.


GREAT BUT WHEN ARE WE GOING TO SEE V2.117 WITH ALL THE BUG FIXES.

THE UPDATES HAVE SLOWED DOWN IN THE LAST FEW YEARS - FIX THE BUGS THEN MOVE ONTO NEXT VERSION PLEASE. VERY HARD TO RUN MACHINES WITH THE BUGS ESPECIALLY THE LATHE .

Even more annoying is the two versions of v2.115 floating around - why wasnt the updated version 2.116 ?
Delco
 
Posts: 357
Joined: Tue Apr 02, 2019 4:23 am

Re: 2.116 - Probe doesnt stop immediately on touch

Postby cncdrive » Sun Jun 09, 2024 11:38 am

We final testing 1.2117 currently, all the reported bugs were fixed, so it should be out soon if we don't find any more problems in the final tests.
cncdrive
Site Admin
 
Posts: 4780
Joined: Tue Aug 12, 2014 11:17 pm

Re: 2.116 - Probe doesnt stop immediately on touch

Postby MRob » Thu Jun 20, 2024 10:20 pm

...and I apologise for confusing the naming convention by calling current built 2.116 when I should have said 1.2116, I see it is spreading! :oops: . Looking forward to the new build though, soon sounds good!
MRob
 
Posts: 45
Joined: Wed Dec 04, 2019 10:10 pm


Return to Report a bug

Who is online

Users browsing this forum: No registered users and 6 guests