limit and homing switches
Posted: Tue Aug 09, 2022 11:50 pmI built my cnc plasma table using the AXBB-e controller. I used proximity switches for limit switches in series. My question is; can they double as homing switches?
forum.cncdrive.com
UCCNC machine control software support forum
https://www.forum.cncdrive.com/
limit and homing switches
Page 1 of 1
Posted: Tue Aug 09, 2022 11:50 pmRe: limit and homing switches
Posted: Wed Aug 10, 2022 10:37 amYes, just enter the same port and pin number for the home switch inputs.
Re: limit and homing switches
Posted: Wed Aug 10, 2022 9:34 pmWorked perfectly.
Thanks
Thanks