Disable another input while probing

This is the place to talk about and share things related to CNC plasma machines using UCCNC

Disable another input while probing

Postby repauli1 » Tue Mar 09, 2021 1:17 am

I am wanting to disable an assigned limit input while my torch is probing.. is a macro the way to go or does someone have an easier solution?
repauli1
 
Posts: 8
Joined: Tue Mar 09, 2021 1:12 am

Re: Disable another input while probing

Postby dezsoe » Tue Mar 09, 2021 12:25 pm

You cannot disable a limit input while g-code is running. To disable a limit you have to press Apply or Save settings and that cannot be done while running a g-code. However, you may have a relay connected to an output which can phisically override the limit sensor and you can switch an output from g-code with a macro or if you have ethernet controller then you can use M10.x/M11.x.
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Disable another input while probing

Postby repauli1 » Thu Mar 11, 2021 1:45 am

Thanks, I added them into the M31, and works perfect!
repauli1
 
Posts: 8
Joined: Tue Mar 09, 2021 1:12 am


Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 14 guests