forum.cncdrive.com

Posted: **Sat Jan 20, 2018 11:05 pm**

Hi Terry,

This macro is the surface probe generator macro.

And a remark: could you, please, replace @"C:\UCCNC\" with Application.StartupPath+ˇ\\" in your future uploads? I have no UCCNC on drive C: and have no UCCNC folder at all. (At the moment I have 49 versions installed in E:\UCCNCNF\<version> folders, but anyone else can have a folder other than C:\UCCNC. Thanks in advance!)

Posted: **Thu Dec 13, 2018 9:18 am**

Code: Select all: // ##Feeds_and_Speeds_Wiz.M9102 MyForm = new Form(); MyForm.Size = new System.Drawing.Size(700, 650); MyForm.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen; MyForm.Text = " Feeds and Speeds v1.01"; MyForm.AutoSize =true; MyForm. TopMost = true; MyForm.Focus(); // RPM2 // RPM2.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); RPM2.Location = new System.Drawing.Point(150, 459); RPM2.Name = "RPM2"; RPM2.Size = new System.Drawing.Size(64, 26); RPM2.TabIndex = 52; RPM2.TabStop = false; RPM2.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // SurfSpeed // SurfSpeed.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); SurfSpeed.Location = new System.Drawing.Point(150, 416); SurfSpeed.Name = "SurfSpeed"; SurfSpeed.Size = new System.Drawing.Size(64, 26); SurfSpeed.TabIndex = 50; SurfSpeed.TabStop = false; SurfSpeed.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // FeedRate // FeedRate.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); FeedRate.Location = new System.Drawing.Point(371, 459); FeedRate.Name = "FeedRate"; FeedRate.Size = new System.Drawing.Size(64, 26); FeedRate.TabIndex = 53; FeedRate.TabStop = false; FeedRate.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // label1 // label1.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label1.Location = new System.Drawing.Point(119, 84); label1.Name = "label1"; label1.Size = new System.Drawing.Size(110, 20); label1.TabIndex = 23; label1.Text = "Material Type"; label1.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // label2 // label2.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label2.Location = new System.Drawing.Point(311, 327); label2.Name = "label2"; label2.Size = new System.Drawing.Size(119, 20); label2.TabIndex = 24; label2.Text = "Tool Mat Type"; label2.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // HoleDia // HoleDia.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); HoleDia.Location = new System.Drawing.Point(22, 420); HoleDia.Name = "HoleDia"; HoleDia.Size = new System.Drawing.Size(122, 20); HoleDia.TabIndex = 26; HoleDia.Text = "Surface Speed"; HoleDia.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // label5 // label5.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label5.Location = new System.Drawing.Point(117, 270); label5.Name = "label5"; label5.Size = new System.Drawing.Size(59, 20); label5.TabIndex = 30; label5.Text = "UNITS "; label5.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // label6 // label6.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label6.Location = new System.Drawing.Point(265, 420); label6.Name = "label6"; label6.Size = new System.Drawing.Size(100, 20); label6.TabIndex = 29; label6.Text = "Feed Rate"; label6.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // label7 // label7.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label7.Location = new System.Drawing.Point(67, 327); label7.Name = "label7"; label7.Size = new System.Drawing.Size(109, 20); label7.TabIndex = 28; label7.Text = "Num of Flutes"; label7.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // label9 // label9.Font = new System.Drawing.Font("Microsoft Sans Serif", 24F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label9.Location = new System.Drawing.Point(205, 21); label9.Name = "label9"; label9.Size = new System.Drawing.Size(411, 40); label9.TabIndex = 31; label9.Text = "UCCNC Feeds and Speeds"; // // GenProgram // GenProgram.BackgroundImageLayout = System.Windows.Forms.ImageLayout.None; GenProgram.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); GenProgram.Location = new System.Drawing.Point(296, 516); GenProgram.Name = "GenProgram"; GenProgram.Size = new System.Drawing.Size(204, 39); GenProgram.TabIndex = 10; GenProgram.Text = "Generate Feeds Speeds"; GenProgram.UseVisualStyleBackColor = true; GenProgram.Click += new EventHandler(GenProgram_Click); // Define the Event Handler (VERY IMPORTANT) // // FeedRate2 // FeedRate2.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); FeedRate2.Location = new System.Drawing.Point(371, 417); FeedRate2.Name = "FeedRate2"; FeedRate2.Size = new System.Drawing.Size(64, 26); FeedRate2.TabIndex = 51; FeedRate2.TabStop = false; FeedRate2.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // label14 // label14.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label14.Location = new System.Drawing.Point(33, 463); label14.Name = "label14"; label14.Size = new System.Drawing.Size(111, 20); label14.TabIndex = 42; label14.Text = "Tool RPM"; label14.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // MatType // MatType.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); MatType.FormattingEnabled = true; MatType.ItemHeight = 20; MatType.Items.AddRange(new object[] { "Alloy Steels Hard", "Aluminum 2024", "Aluminum 6061", "Aluminum 7075", "Aluminum Cast", "Brass", "Bronze", "Cast Iron Hard", "Cast Iron Soft", "Cast Steel", "Copper", "High Manganese Steel", "Magnesium", "Mild Steel", "Stainless Steel", "Titanium", "Tool Steel"}); MatType.Location = new System.Drawing.Point(235, 84); MatType.Name = "MatType"; MatType.Size = new System.Drawing.Size(302, 24); MatType.Sorted = true; MatType.TabIndex = 1; MatType.SelectedIndex = 0; // // opsMan // opsMan.BackgroundImageLayout = System.Windows.Forms.ImageLayout.None; opsMan.Location = new System.Drawing.Point(621, 521); opsMan.Name = "opsMan"; opsMan.Size = new System.Drawing.Size(115, 31); opsMan.TabIndex = 11; opsMan.Text = "Operation Manual"; opsMan.UseVisualStyleBackColor = true; opsMan.Click += new EventHandler(opsMan_Click); // Define the Event Handler (VERY IMPORTANT) // // ToolType // ToolType.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); ToolType.FormattingEnabled = true; ToolType.ItemHeight = 20; ToolType.Items.AddRange(new object[] { "Carbide", "HSS"}); ToolType.Location = new System.Drawing.Point(436, 327); ToolType.Name = "ToolType"; ToolType.Size = new System.Drawing.Size(118, 24); ToolType.Sorted = true; ToolType.TabIndex = 9; ToolType.SelectedIndex = 0; // // TipDiam // TipDiam.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); TipDiam.Location = new System.Drawing.Point(436, 264); TipDiam.Name = "TipDiam"; TipDiam.Size = new System.Drawing.Size(64, 26); TipDiam.TabIndex = 7; TipDiam.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // label3 // label3.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label3.Location = new System.Drawing.Point(343, 267); label3.Name = "label3"; label3.Size = new System.Drawing.Size(87, 20); label3.TabIndex = 30; label3.Text = "Tool Diam"; label3.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // Units1 // Units1.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); Units1.FormattingEnabled = true; Units1.ItemHeight = 20; Units1.Items.AddRange(new object[] { "INCH", "MM"}); Units1.Location = new System.Drawing.Point(182, 266); Units1.Name = "Units1"; Units1.Size = new System.Drawing.Size(80, 24); Units1.Sorted = true; Units1.TabIndex = 6; Units1.SelectedIndex = 0; // // label4 /* // label4.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label4.Location = new System.Drawing.Point(265, 462); label4.Name = "label4"; label4.Size = new System.Drawing.Size(100, 20); label4.TabIndex = 49; label4.Text = "Tool Load"; label4.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; */ // // label10 // label10.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label10.Location = new System.Drawing.Point(504, 423); label10.Name = "label10"; label10.Size = new System.Drawing.Size(72, 20); label10.TabIndex = 54; label10.Text = "HP Load"; label10.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // HPload // HPload.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); HPload.Location = new System.Drawing.Point(582, 420); HPload.Name = "HPload"; HPload.Size = new System.Drawing.Size(64, 26); HPload.TabIndex = 55; HPload.TabStop = false; HPload.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // label11 // label11.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label11.Location = new System.Drawing.Point(12, 375); label11.Name = "label11"; label11.Size = new System.Drawing.Size(744, 23); label11.TabIndex = 57; label11.Text = "_________________________________ Calculations _________________________________" + ""; // // label12 // label12.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label12.Location = new System.Drawing.Point(12, 217); label12.Name = "label12"; label12.Size = new System.Drawing.Size(744, 23); label12.TabIndex = 58; label12.Text = "_________________________________ Tool Data Input ______________________________" + ""; // // label8 // label8.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label8.Location = new System.Drawing.Point(146, 139); label8.Name = "label8"; label8.Size = new System.Drawing.Size(100, 20); label8.TabIndex = 62; label8.Text = "Depth of Cut"; label8.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // label15 // label15.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label15.Location = new System.Drawing.Point(333, 136); label15.Name = "label15"; label15.Size = new System.Drawing.Size(134, 20); label15.TabIndex = 61; label15.Text = "Tool Step Over %"; label15.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // Doc // Doc.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); Doc.Location = new System.Drawing.Point(252, 133); Doc.Name = "Doc"; Doc.Size = new System.Drawing.Size(64, 26); Doc.TabIndex = 2; Doc.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // Tso // Tso.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); Tso.Location = new System.Drawing.Point(473, 133); Tso.Name = "Tso"; Tso.Size = new System.Drawing.Size(64, 26); Tso.TabIndex = 3; Tso.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // label16 // label16.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label16.Location = new System.Drawing.Point(105, 186); label16.Name = "label16"; label16.Size = new System.Drawing.Size(141, 20); label16.TabIndex = 66; label16.Text = "Max Spindle RPM"; label16.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // label17 // label17.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label17.Location = new System.Drawing.Point(343, 183); label17.Name = "label17"; label17.Size = new System.Drawing.Size(124, 20); label17.TabIndex = 65; label17.Text = "Max Spindle HP"; label17.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // Mrpm // Mrpm.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); Mrpm.Location = new System.Drawing.Point(252, 180); Mrpm.Name = "Mrpm"; Mrpm.Size = new System.Drawing.Size(64, 26); Mrpm.TabIndex = 4; Mrpm.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // Mhp // Mhp.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); Mhp.Location = new System.Drawing.Point(473, 180); Mhp.Name = "Mhp"; Mhp.Size = new System.Drawing.Size(64, 26); Mhp.TabIndex = 5; Mhp.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // label18 // label18.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); label18.Location = new System.Drawing.Point(456, 462); label18.Name = "label18"; label18.Size = new System.Drawing.Size(120, 20); label18.TabIndex = 67; label18.Text = "% Spindle Load"; label18.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; // // Sload // Sload.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); Sload.Location = new System.Drawing.Point(582, 459); Sload.Name = "Sload"; Sload.Size = new System.Drawing.Size(64, 26); Sload.TabIndex = 68; Sload.TabStop = false; Sload.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // // NumFlutes // NumFlutes.Font = new System.Drawing.Font("Microsoft Sans Serif", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); NumFlutes.Location = new System.Drawing.Point(182, 327); NumFlutes.Name = "NumFlutes"; NumFlutes.Size = new System.Drawing.Size(64, 26); NumFlutes.TabIndex = 8; NumFlutes.TextAlign = System.Windows.Forms.HorizontalAlignment.Center; // MyForm.Controls.Add(NumFlutes); MyForm.Controls.Add(label18); MyForm.Controls.Add(Sload); MyForm.Controls.Add(label16); MyForm.Controls.Add(label17); MyForm.Controls.Add(Mrpm); MyForm.Controls.Add(Mhp); MyForm.Controls.Add(label8); MyForm.Controls.Add(label15); MyForm.Controls.Add(Doc); MyForm.Controls.Add(Tso); MyForm.Controls.Add(label12); MyForm.Controls.Add(label11); MyForm.Controls.Add(label10); MyForm.Controls.Add(HPload); //MyForm.Controls.Add(label4); MyForm.Controls.Add(Units1); MyForm.Controls.Add(ToolType); MyForm.Controls.Add(opsMan); MyForm.Controls.Add(MatType); MyForm.Controls.Add(label14); MyForm.Controls.Add(FeedRate2); MyForm.Controls.Add(GenProgram); MyForm.Controls.Add(label9); MyForm.Controls.Add(label3); MyForm.Controls.Add(label5); MyForm.Controls.Add(label6); MyForm.Controls.Add(label7); MyForm.Controls.Add(HoleDia); MyForm.Controls.Add(label2); MyForm.Controls.Add(label1); MyForm.Controls.Add(FeedRate); MyForm.Controls.Add(SurfSpeed); MyForm.Controls.Add(TipDiam); MyForm.Controls.Add(RPM2); // MyForm.Controls.Add(shapes); // ResumeLayout(false); // PerformLayout(); MyForm.ShowDialog(); #Events Form MyForm; //This is a global variable, a Windows Form Label label3 = new Label(); TextBox RPM2 = new TextBox(); TextBox SurfSpeed = new TextBox(); TextBox FeedRate = new TextBox(); Label label1 = new Label(); Label label2 = new Label(); Label HoleDia = new Label(); Label label5 = new Label(); Label label6 = new Label(); Label label7 = new Label(); Label label9 = new Label(); Button GenProgram = new Button(); TextBox FeedRate2 = new TextBox(); Label label14 = new Label(); ListBox MatType = new ListBox(); Button opsMan = new Button(); ListBox ToolType = new ListBox(); TextBox TipDiam = new TextBox(); //Label label3 = new Label(); ListBox Units1 = new ListBox(); //Label label4 = new Label(); Label label10 = new Label(); TextBox HPload = new TextBox(); Label label11 = new Label(); Label label12 = new Label(); Label label8 = new Label(); Label label15 = new Label(); TextBox Doc = new TextBox(); TextBox Tso = new TextBox(); Label label16 = new Label(); Label label17 = new Label(); TextBox Mrpm = new TextBox(); TextBox Mhp = new TextBox(); Label label18 = new Label(); TextBox Sload = new TextBox(); TextBox NumFlutes = new TextBox(); void opsMan_Click(object sender, EventArgs e) { MessageBox.Show(" Manual not available at this time."); } void GenProgram_Click(object sender, EventArgs e) { Calculate(); } public void Calculate() { if (String.IsNullOrEmpty(MatType.Text) || String.IsNullOrEmpty(TipDiam.Text) || String.IsNullOrEmpty(Tso.Text) || String.IsNullOrEmpty(NumFlutes.Text) || String.IsNullOrEmpty(Mrpm.Text)|| String.IsNullOrEmpty(Doc.Text)|| String.IsNullOrEmpty(Mhp.Text) || String.IsNullOrEmpty(ToolType.Text) || String.IsNullOrEmpty(Units1.Text)) // Parameter is EMPTY, so we need to stop help { MessageBox.Show("Parameters are Missing to Complete the Function"); //UC.Stop(); return; } //Calculate the Feed and Speed string Mat = (MatType.Text); double sfm ; double Tdia = Convert.ToDouble( TipDiam.Text); string RPM; double Ft; double Frate; double Nt = Convert.ToDouble( Tso.Text); double UHP; double MRR; double HP; double Nf = Convert.ToDouble(NumFlutes.Text); double mRPM = Convert.ToDouble(Mrpm.Text); double DOC = Convert.ToDouble ( Doc.Text); string Shp; double MHP = Convert.ToDouble( Mhp.Text); double rpm; double Carb; string TType = Convert.ToString(ToolType.Text); string Units = Convert.ToString(Units1.Text); //>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> //<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< if (Mat == "Alloy Steels Hard") { sfm = 200; Ft = .004; UHP = 2.2; Carb = 1.6; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if (Mat == "Aluminum 2024") { sfm = 200; Ft = .007; UHP = .4; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Aluminum 6061") { sfm = 200; Ft = .007; UHP = .4; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Aluminum 7075") { sfm = 200; Ft = .007; UHP = .4; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Aluminum Cast") { sfm = 200; Ft = .007; UHP = .4; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Brass") { sfm = 200; Ft = .008; UHP = .4; Carb = 2.3; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Bronze") { sfm = 200; Ft = .007; UHP = .4; Carb = 2.2; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Cast Iron Hard") { sfm = 200; Ft = .004; UHP = .8; Carb = 5.2; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Cast Iron Soft") { sfm = 200; Ft = .007; UHP = .4; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Copper") { sfm = 200; Ft = .006; UHP = .8; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "High Manganese Steel") { sfm = 200; Ft = .003; UHP = 2.4; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Magnesium") { sfm = 200; Ft = .008; UHP = .2; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Mild Steel") { sfm = 200; Ft = .006; UHP = 1.4; Carb = 2.5; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Stainless Steel") { sfm = 200; Ft = .004; UHP = 1.9; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Titanium") { sfm = 200; Ft = .004; UHP = 1.4; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } else if ( Mat == "Tool Steel") { sfm = 200; Ft = .004; UHP = 2.5; Carb = 1.7; if (TType == "Carbide") { sfm = (sfm * Carb); } rpm = ((3.82 * sfm) / Tdia); //RPM = Convert.ToString(rpm); //Frate = (Ft * Nf * Convert.ToDouble(RPM)); if (rpm > mRPM) { RPM = Convert.ToString(Mrpm.Text); Frate = (Ft * Nf * Convert.ToDouble(rpm)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } else if (rpm < mRPM) { RPM = Convert.ToString(rpm); Frate = (Ft * Nf * Convert.ToDouble(RPM)); MRR = (DOC * Tdia * (Nt/100) * Frate); HP = (UHP * MRR); Shp = Convert.ToString(((HP / MHP)*100)); FeedRate2.Text = Convert.ToString(Frate); SurfSpeed.Text = Convert.ToString(sfm) ; HPload.Text = Convert.ToString(HP); double hptest = (Convert.ToDouble(Shp)); if (hptest > 100) { Sload.ForeColor = Color.Red; } else if (hptest <= 100) { Sload.ForeColor = Color.Black; } Sload.Text = Shp; RPM2.Text = RPM; } } } // MyForm.Close();

Posted: **Wed May 05, 2021 3:23 pm**

i borrowed how to change box and text colours from this :-)

forum.cncdrive.com

Feeds and Speeds Wizard

Re: Feeds and Speeds Wizard

Re: Feeds and Speeds Wizard

Re: Feeds and Speeds Wizard