Fusion Post processor

Here is where you can drop off Examples of WORKING macros,plugins,Gcode programs , macro Wizards etc.
Please give a brief description of what it is and how it works.

Re: Fusion Post processor

Postby dezsoe » Fri Oct 11, 2019 10:38 am

No, the G0 G53 Z0 is OK now.

You asked for separate settings per each probe mode, because you sometimes forgot to change some settings. Now on the setup page of the probe screen you have a "Separate settings per mode" checkbox. See your post: Probe functionality.
dezsoe
 
Posts: 901
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Fusion Post processor

Postby Delco » Fri Oct 18, 2019 9:54 pm

yes I found that when I first installed , its very good , the only thing that would make it better is if it saved or had a save function :) rather than having to close uccnc to save , even a autosave on page change would be good :)
Delco
 
Posts: 42
Joined: Tue Apr 02, 2019 4:23 am

Previous

Return to UCCNC TOOL BOX

Who is online

Users browsing this forum: Bing [Bot] and 1 guest