Dear all,
I have some questions and issues with 1.2112:
- After some probing I had the issue, that sometimes the G0/G1 command is limited to 50mm/min without any reason. (e.g. Speed is set to 400 mm/min but movement is limited to 50mm/min) Sometimes it is working sometimes not. Especially in z-movement. Movement is self seems correct but then probing and milling is unacceptable slow. Any idea about that?
- In addition it is unclear to me, what the safe probe mode does. There is no explnation about it. When I activate probing macros of the 2017 woodworker screenset are not working anymore.
Maybe can you help?
BR
Michael