3.5 days long carve work

If you milled something cool and you want to show it to others post it here.

3.5 days long carve work

Postby cncdrive » Fri Jun 28, 2019 10:35 pm

One of StoneyCNC's customer made this with the latest UCCNC test release (because it can run long g-codes in x64 mode), it is a 7 million lines g-code carved into wood, it took 3.5 days of work. :)
Attachments
65291885_10100243874725264_9018419676413165568_n.jpg
64958171_10100243874735244_3930230263677714432_n.jpg
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: 3.5 days long carve work

Postby Haik » Sat Jun 29, 2019 5:33 pm

BEAUTIFUL!!!

It's great to see substantial, high quality and refined creations, especially work like this that is likely bound for a very expensive home or boardroom.

Can you please tell us about some of the technical details? Like... cutting tool (brand, model), feed, speed, RPM, stepover, and wood species.

Excellent work! Thanks for posting.

-H
Haik
 
Posts: 35
Joined: Fri Sep 08, 2017 6:01 pm

Re: 3.5 days long carve work

Postby cncdrive » Mon Jul 01, 2019 4:28 am

Thanks. :)
Unfortunately I have no details, because the work was done by our distributor's customer, so I do not have any details of the work, just the pictures and that it was 3.5days long work and about 7 million lines of single file g-code.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm


Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 3 guests