MPG Pendant Macro help request

This is where you talk about Macros, show examples of your macro scripting and SHARE handy segments of script code as examples.

Re: MPG Pendant Macro help request

Postby Dale » Tue Aug 29, 2017 2:48 pm

I can redo the PCB to have Independent signals for each button if that helps. I have unused wires in the cable. Seeing as I now have a UC300 Motherboard, I now have lots of inputs unlike before. I'll just have to reconfigure my BOB for more inputs and rewire the pendant with a new PCB.

Let me know if this would help.
BTW, Thank you both for your efforts here. Very much appreciated. Can't wait to be able to use the pendant again.
Once you've gone pendant, theres no going back! ;)

Dale
Dale
 
Posts: 27
Joined: Mon Aug 21, 2017 12:23 pm
Location: Alberta, Canada

Re: MPG Pendant Macro help request

Postby Robertspark » Tue Aug 29, 2017 2:58 pm

That but I think I'm ok with reading the pins

Let me have a go at some code this evening (couple of hours) see where I get to
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: MPG Pendant Macro help request

Postby Dale » Tue Sep 05, 2017 12:13 pm

Hello?
Dale
 
Posts: 27
Joined: Mon Aug 21, 2017 12:23 pm
Location: Alberta, Canada

Re: MPG Pendant Macro help request

Postby dezsoe » Tue Sep 05, 2017 12:53 pm

Hello! :)

I didn't forget you, just had an urgent job and ran into a problem with reading all the keys. I will tell you if I have any results.
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: MPG Pendant Macro help request

Postby Dale » Tue Sep 05, 2017 12:55 pm

Thanks for the update, and for helping me out here.

Cheers!

Dale
Dale
 
Posts: 27
Joined: Mon Aug 21, 2017 12:23 pm
Location: Alberta, Canada

Re: MPG Pendant Macro help request

Postby Dale » Fri Jul 06, 2018 1:03 am

Once again....

Thanks for all your help. :roll: :roll: :roll:
Dale
 
Posts: 27
Joined: Mon Aug 21, 2017 12:23 pm
Location: Alberta, Canada

Re: MPG Pendant Macro help request

Postby Dale » Tue Sep 10, 2019 11:56 pm

Never heard back from any of you.
Was it something I said?

Just using my pendant with limited functionality, but man it’s nice to use even as is.

Dale
Dale
 
Posts: 27
Joined: Mon Aug 21, 2017 12:23 pm
Location: Alberta, Canada

Re: MPG Pendant Macro help request

Postby dezsoe » Thu Sep 12, 2019 8:39 am

OMG, it was 2 years ago... I'll try to refresh my memory. There were so many urgent jobs since then.
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Previous

Return to Macros

Who is online

Users browsing this forum: No registered users and 22 guests

cron