Share a screenset

If you created a new screenset and want to share it with others then please post it here. You can talk about screens here.

Share a screenset

Postby Markb » Wed Oct 23, 2019 5:34 pm

I have demo version 1.2111 the person I am trying to share a screenset with has 1.2049.
Are there any issues that we are on different versions?
I am just adding a couple buttons.
Markb
 
Posts: 2
Joined: Wed Oct 23, 2019 5:14 pm

Re: Share a screenset

Postby Markb » Thu Oct 24, 2019 4:00 pm

It did not work. Sharing with a older version.
I even tried to just modify their Plasmascreenset.ssf with notepad and add the two lines of code that created the buttons.
That did not work. Very strange I thought that would work.

The guy I was trying to share a screen set was able to update to the latest version and it works fine now.
Markb
 
Posts: 2
Joined: Wed Oct 23, 2019 5:14 pm

Re: Share a screenset

Postby ger21 » Thu Oct 24, 2019 6:37 pm

It will work, as long as the newer screen doesn't have elements that are not supported by the older version.
It could be because of the AXBB screen.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Share a screenset

Postby Vmax549 » Thu Oct 24, 2019 9:25 pm

It could have to do with the " UCCNC.exe.config " file for UCCNC.

(;-) TP
Vmax549
 
Posts: 331
Joined: Sun Nov 22, 2015 3:25 am
Location: USA


Return to Custom Screensets

Who is online

Users browsing this forum: No registered users and 8 guests