Page 4 of 5
Re: UCCNC Screenset - release.
Posted:
Thu Aug 27, 2020 7:05 amby kig23
Hi r.hoffmann,
sorry for the delay but i've a very busy period. Yes, months ago i made an update to the last UCCNC official release v.2111. Works with all UCCNC devices. The new probe tab and tha cam tab are not implemented.
Re: UCCNC Screenset - release.
Posted:
Thu Aug 27, 2020 10:54 amby r.hoffmann
Hello kig23,
yesterday I got an answer from GP project that the screenset doesn't work with the current version.
which statement is correct now?
Thank you
Robert
Re: UCCNC Screenset - release.
Posted:
Thu Aug 27, 2020 11:12 amby r.hoffmann
Hello Kig23,
I want to use the Screenset with an ATC Spindle.
The tool change should be done from hand.
The tool length is set manualy before.
Is it easy to set this up with this Screenset?
Thank you
Robert
Re: UCCNC Screenset - release.
Posted:
Sat Aug 29, 2020 9:05 amby kig23
Hi Robert,
yes you can use the screen with atc. There are macros in the screenset for manual tool change and for automatic tool change. If you want to use atc you have to modify some of the parameters in macro 20106 (presetting) and M6. If you need some help just let me know.
Re: UCCNC Screenset - release.
Posted:
Sat Aug 29, 2020 10:52 amby r.hoffmann
Hi Kig23,
oh yes i have many questions.
Where i can define the ports and pins for the sensors of the spindle?
In the M6 Macro I found it for the chuck and for cleaning the spindle.
Please tell me wat changes i have to do for Toolchange by hand without a Toolrack.
Thank you
Robert
Re: UCCNC Screenset - release.
Posted:
Sat Aug 29, 2020 5:22 pmby r.hoffmann
Kig23,
I can't enable the "Screen Magic" plugin.
In UCCNC its not available in the pluginconfig.
Re: UCCNC Screenset - release.
Posted:
Mon Aug 31, 2020 10:52 amby kig23
Hi Robert,
as you know I sold the whole project to a friend of mine. This project is no longer my property. To help you just let me know which version of UCCNC you're using and which version of UCCNC screenset you have. I suppose that you have the screenset for UCCNC ver.1.2049 and not the update version. Let me know.
Re: UCCNC Screenset - release.
Posted:
Mon Aug 31, 2020 11:43 amby r.hoffmann
Hi Kig23,
I have installed the Version 1.2111.
Where can I define the ports and pins for the Sensors of my atc spindle?
Robert
Re: UCCNC Screenset - release.
Posted:
Mon Aug 31, 2020 2:47 pmby kig23
Hi Robert,
which version of the screenset you have? To check which version of the screenset you have to open UCCNC ver.1.2111 in demo mode and select AXBB device. If it works correct means that you have the last version of the screenset. Let me know.
Re: UCCNC Screenset - release.
Posted:
Mon Aug 31, 2020 4:59 pmby r.hoffmann
Hi Kig23,
it doesn't work.
How can I get the last version?
Thank you
Robert