2017 Screenset Update

If you created a new screenset and want to share it with others then please post it here. You can talk about screens here.

Re: 2017 Screenset Update

Postby johnsattuk » Fri Aug 27, 2021 8:29 am

Any chance of a sneak preview of 2021 Screenset
johnsattuk
 
Posts: 5
Joined: Thu Aug 12, 2021 1:24 pm

Re: 2017 Screenset Update

Postby kverne » Thu Sep 09, 2021 12:02 pm

We're approaching 2yrs since the last mention that it was almost done..
kverne
 
Posts: 2
Joined: Fri Sep 25, 2020 6:17 pm

Re: 2017 Screenset Update

Postby ger21 » Thu Sep 09, 2021 4:53 pm

Sorry for the delays.
Unfortunately, things in my life have changed and I don't have the free time that I used to. Early last year I bought a new house, and this has taken up most of my time. I still need a lot of time to get my shop (garage) organized and functional so I can get my own machine working.

I'm going to try to get my AXBB-E wired up so I can use it to test the new auto zero macros.
Once those are done, I'll have some people do some testing to make sure it's working properly.
Once I can get a working version out, I'll start working on translating the new probing plugin into the screenset. I originally wasn't going to do it, but it looks like things have changed that will now allow it. Lots of work, though.
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 2051
Joined: Sat Sep 03, 2016 2:17 am

Re: 2017 Screenset Update

Postby spillage » Thu Sep 09, 2021 11:39 pm

Just know that you’re time and effort’s are appreciated, even though that may not be verbalized often.
Bryan
“Simplicity is the ultimate sophistication“ Leonardo Da Vinci
spillage
 
Posts: 22
Joined: Sat Aug 01, 2020 11:07 pm

Re: 2017 Screenset Update

Postby johnsattuk » Fri Sep 10, 2021 11:12 am

spillage wrote:Just know that you’re time and effort’s are appreciated, even though that may not be verbalized often.


Seconded :D
johnsattuk
 
Posts: 5
Joined: Thu Aug 12, 2021 1:24 pm

Previous

Return to Custom Screensets

Who is online

Users browsing this forum: No registered users and 1 guest