Some Coasters!

If you milled something cool and you want to show it to others post it here.

Some Coasters!

Postby eradicatore » Wed Feb 02, 2022 12:50 am

West Epoxy
walnut
30 degree vcarve bit
60 degree vcarve bit
1/8 inch endmill
cork bottom stickers 1mm

Tried stain, mineral spirits, and tung oil so far.
Attachments
IMG_20220126_192551012_HDR Small.jpeg
IMG_20220126_192551012_HDR Small.jpeg (23.68 KiB) Viewed 10161 times
IMG_20220130_114745973_HDR Small.jpeg
IMG_20220130_114745973_HDR Small.jpeg (26.32 KiB) Viewed 10161 times
IMG_20220131_190918416 Small.jpeg
IMG_20220131_190918416 Small.jpeg (23.44 KiB) Viewed 10161 times
IMG_20220201_080101682_HDR Small.jpeg
IMG_20220201_080101682_HDR Small.jpeg (23.74 KiB) Viewed 10161 times
IMG_20220201_181014181 Small.jpeg
IMG_20220201_181014181 Small.jpeg (27.59 KiB) Viewed 10161 times
IMG_20220201_182326002_HDR Small.jpeg
IMG_20220201_182326002_HDR Small.jpeg (25.28 KiB) Viewed 10161 times
eradicatore
 
Posts: 18
Joined: Sun Jan 02, 2022 5:24 pm

Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 3 guests