Controller is UCCNC + AXBB-E and DMM servo drives 1.8kW AC servos.
"mini" machine installed.
3 posts
• Page 1 of 1
"mini" machine installed.
by cncdrive » Wed Dec 18, 2019 1:00 pm
We've installed a "small" machine at a customer yesterday, photos attached.
Controller is UCCNC + AXBB-E and DMM servo drives 1.8kW AC servos.
Controller is UCCNC + AXBB-E and DMM servo drives 1.8kW AC servos.
- Attachments
-
-
- cncdrive
- Site Admin
- Posts: 4719
- Joined: Tue Aug 12, 2014 11:17 pm
Re: "mini" machine installed.
by eabrust » Fri Dec 27, 2019 1:02 am
I've been meaning to ask, is there a specific purpose or product this machine is for? Is it for wood, stone, other?
regards
Eric
regards
Eric
CraftyCNC: Plugins for UCCNC (and other neat stuff): http://www.craftycnc.com/plugins-for-uccnc/
- eabrust
- Posts: 354
- Joined: Fri Sep 16, 2016 2:32 am
- Location: Near Shirland IL, USA
Re: "mini" machine installed.
by cncdrive » Fri Dec 27, 2019 4:59 am
They cutting plastic sheets on the machine. They build tanks for tanker trucks and communal tanks etc.
They have other machines from us also, but they wanted to keep those off camera. One is to machine plastic tubes up to 4meters in diameter and 6 meters in height. That is also a giant machine.
They have other machines from us also, but they wanted to keep those off camera. One is to machine plastic tubes up to 4meters in diameter and 6 meters in height. That is also a giant machine.
- cncdrive
- Site Admin
- Posts: 4719
- Joined: Tue Aug 12, 2014 11:17 pm
3 posts
• Page 1 of 1
Return to What you've made with your machine post the pictures, videos here
Who is online
Users browsing this forum: No registered users and 1 guest