Page 1 of 1

3.5 days long carve work

PostPosted: Fri Jun 28, 2019 10:35 pm
by cncdrive
One of StoneyCNC's customer made this with the latest UCCNC test release (because it can run long g-codes in x64 mode), it is a 7 million lines g-code carved into wood, it took 3.5 days of work. :)

Re: 3.5 days long carve work

PostPosted: Sat Jun 29, 2019 5:33 pm
by Haik

It's great to see substantial, high quality and refined creations, especially work like this that is likely bound for a very expensive home or boardroom.

Can you please tell us about some of the technical details? Like... cutting tool (brand, model), feed, speed, RPM, stepover, and wood species.

Excellent work! Thanks for posting.


Re: 3.5 days long carve work

PostPosted: Mon Jul 01, 2019 4:28 am
by cncdrive
Thanks. :)
Unfortunately I have no details, because the work was done by our distributor's customer, so I do not have any details of the work, just the pictures and that it was 3.5days long work and about 7 million lines of single file g-code.