1000x500mm high precision router build - NEED FORUM HELP
Posted: Wed Nov 21, 2018 8:23 pm
-- in red color are questions for the forum --
After many years working on China's CNC machine SYIL X5 with Mach3 with Smoothstepper
youtube - https://youtu.be/oYdJZdeMTzE
I decided to build my own CNC
This is the early version of the machine which I want to build.
BUILD INFO:
The main chassis will be made from granite.
Controller:
After many problems with Mach3 ( drilling G83 never worked correctly and 3D machining worked like... ) I decided to give a try UCCNC
Which version of UCCNC should I pick? UC100, UC300, UC300ETH or UC400ETH
Which uccnc breakout board should I use? UB1, UCBB
LINEAR RAILS AND SLIDERS FROM HIWIN sold by
http://www.fasttobuy.com Any experience with this company, can you recommend alternative?
2x 1340mm HGR25R;
1x 800mm HGR20R;
1X 420mm HGR20R
slider blocks
4X HGW25HA
8X HGH20CA
ballscrews TBI sold by http://www.fasttobuy.com
SFU2504-L1280
SFU2004-L930
SFU2004-L400
BALLSCREW SUPPORT UNITS from
https://www.syk.tw Any expierance with this compay, can you recomend alternative?
JGL-100/2.5R24-25 - ATC spindle 24000rpm 2.5kW from :
http://www.jian-ken.com/electric-spindle-machining-center/pneumatic-tool-changing-motorized-spindle.html
review of the spindle - https://www.youtube.com/watch?v=pWNeW-lH9RA&t=1159s
If I add an encoder to the spindle will I be able to use rigid/floating tapping with this spindle? I hope to use small taps M2- M6 in plastic and aluminium? VFD has a braking resistor function
SUNFAR VFD E550-2S0040B 1000HZ with RS485 interface, support MODBUS -recomendet by spindle seller
manual- http://sion.rs/download/sunfar/E550manual.pdf
Rated capacity (KVA)6.3
Rated output current (A) 16.5
Adaptive motor power (KW) 4.0
Is this compatible with UCCNC?
Toauto NEMA 34 Digital AC Servo Drive Motor 90ST-M02430 2.4NM 750W 220V High Speed 3000rpm for CNC Router
Control mode: IGBT PWM sine wave control sold by http://www.fasttobuy.com
https://www.fasttobuy.com/nema-34-digital-ac-servo-drive-motor-24nm-750w-220v-high-speed-3000rpm-for-cnc-router_p35886.html
Looks like this servos are very popular in China and cost US$ 242.00 inc. cables and postage . Any experience with this servos? Anybody willing to help with setup?
Finally, I was trying to find basic wiring for 3 axes 4 servo UCCNC systems inc. relays, filters, cable spec, etc. - any suggestions of the thread with basic diagrams to start?
Additional functions:
- ATC
- uccnc mpg -
- arduino cnc control. Panel - like in video made by Battwell - https://www.youtube.com/watch?v=6QUOmCKuJHQ
- laser attachment for engraving.
My knowledge about electronics and programming (like macros) at the moment is close to ZERO but I hope I will be able to put this machine all together with the help of this great community
Regards Arek
After many years working on China's CNC machine SYIL X5 with Mach3 with Smoothstepper
youtube - https://youtu.be/oYdJZdeMTzE
I decided to build my own CNC
This is the early version of the machine which I want to build.
BUILD INFO:
The main chassis will be made from granite.
Controller:
After many problems with Mach3 ( drilling G83 never worked correctly and 3D machining worked like... ) I decided to give a try UCCNC
Which version of UCCNC should I pick? UC100, UC300, UC300ETH or UC400ETH
Which uccnc breakout board should I use? UB1, UCBB
LINEAR RAILS AND SLIDERS FROM HIWIN sold by
http://www.fasttobuy.com Any experience with this company, can you recommend alternative?
2x 1340mm HGR25R;
1x 800mm HGR20R;
1X 420mm HGR20R
slider blocks
4X HGW25HA
8X HGH20CA
ballscrews TBI sold by http://www.fasttobuy.com
SFU2504-L1280
SFU2004-L930
SFU2004-L400
BALLSCREW SUPPORT UNITS from
https://www.syk.tw Any expierance with this compay, can you recomend alternative?
JGL-100/2.5R24-25 - ATC spindle 24000rpm 2.5kW from :
http://www.jian-ken.com/electric-spindle-machining-center/pneumatic-tool-changing-motorized-spindle.html
review of the spindle - https://www.youtube.com/watch?v=pWNeW-lH9RA&t=1159s
If I add an encoder to the spindle will I be able to use rigid/floating tapping with this spindle? I hope to use small taps M2- M6 in plastic and aluminium? VFD has a braking resistor function
SUNFAR VFD E550-2S0040B 1000HZ with RS485 interface, support MODBUS -recomendet by spindle seller
manual- http://sion.rs/download/sunfar/E550manual.pdf
Rated capacity (KVA)6.3
Rated output current (A) 16.5
Adaptive motor power (KW) 4.0
Is this compatible with UCCNC?
Toauto NEMA 34 Digital AC Servo Drive Motor 90ST-M02430 2.4NM 750W 220V High Speed 3000rpm for CNC Router
Control mode: IGBT PWM sine wave control sold by http://www.fasttobuy.com
https://www.fasttobuy.com/nema-34-digital-ac-servo-drive-motor-24nm-750w-220v-high-speed-3000rpm-for-cnc-router_p35886.html
Looks like this servos are very popular in China and cost US$ 242.00 inc. cables and postage . Any experience with this servos? Anybody willing to help with setup?
Finally, I was trying to find basic wiring for 3 axes 4 servo UCCNC systems inc. relays, filters, cable spec, etc. - any suggestions of the thread with basic diagrams to start?
Additional functions:
- ATC
- uccnc mpg -
- arduino cnc control. Panel - like in video made by Battwell - https://www.youtube.com/watch?v=6QUOmCKuJHQ
- laser attachment for engraving.
My knowledge about electronics and programming (like macros) at the moment is close to ZERO but I hope I will be able to put this machine all together with the help of this great community
Regards Arek