New Motor Plate For My Spindle Upgrade

If you milled something cool and you want to show it to others post it here.

New Motor Plate For My Spindle Upgrade

Postby ThreeDJ16 » Sun Oct 28, 2018 2:16 am

Just a quick video making a new motor plate for the DMM 750W servo motor that I have on my machine.

UCCNC and Screenset 2017 (with a few tweaks thanks to Gerry and the folks on this forum who posted the tool height to tool table macro). I've added that macro now where the Auto Zero Initialize was. To setup my tool table, zero reference tool Z on touch off block, click goto tool change position, click change tool to the one I want measured and then click the new button Tool Height where the auto tool initialize was. Works like a charm.

Anyway, vid making a part. Both these vids are with my old motor, which is definitely struggling.

https://www.youtube.com/watch?v=2KMH0oSEoPA

Another vid making the plate that attaches to the T-slot:

https://www.youtube.com/watch?v=62dD8wdh9hI
ThreeDJ16
 
Posts: 164
Joined: Tue Oct 31, 2017 5:57 pm

Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 4 guests