UCCNC STEPCRAFT Label Making

If you milled something cool and you want to show it to others post it here.

UCCNC STEPCRAFT Label Making

Postby StoneyCNC » Fri Jan 16, 2015 9:00 pm



Toolpaths generated in VcarvePro and the UCCNC software used to control a STEPCRAFT S420 to machine labels out of Gravoply.
StoneyCNC
 
Posts: 10
Joined: Wed Aug 13, 2014 10:45 pm

Re: UCCNC STEPCRAFT Label Making

Postby LordVishnu » Mon Nov 07, 2022 11:01 am

This is a quick demo of the setup and operation. The labels are for the face plates on a Z axis control board I built for my router. I made 3 of the boards, so I needed 3 sets of labels. I made 4 sets of labels, actually. I lost one of the boards and had to make another.

The setup is pretty simple. I run the UCCNC software on a Windows 10 laptop and use an old ethernet cable to connect the laptop to the controller on the router. I have the router connected to a 120 VAC circuit via a power strip. I have a USB cable running from the controller on the router to the laptop.

I have a 2.2 kW spindle motor on the router, a 2.2 kW inverter, and a set of VFDs. The spindle motor and inverter are from STEPCRAFT, and the VFDs are from a Chinese supplier.

I use a De Walt router with a 1/4 inch diameter spiral up-cut end mill when machining the labels.GB Whatsapp
LordVishnu
 
Posts: 1
Joined: Mon Nov 07, 2022 10:58 am
Location: Kuwait

Re: UCCNC STEPCRAFT Label Making

Postby thegreatwaldo » Mon Dec 05, 2022 10:59 am

StoneyCNC wrote:

Toolpaths generated in VcarvePro and the UCCNC software used to control a STEPCRAFT S420 to machine labels out of Gravoply.

I'm just seeing an empty white space! what exactly have you posted?
Cheers.
Andrew
thegreatwaldo
 
Posts: 174
Joined: Tue Sep 06, 2016 8:28 pm

Re: UCCNC STEPCRAFT Label Making

Postby ger21 » Mon Dec 05, 2022 12:18 pm

For me it says the videos are private.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2671
Joined: Sat Sep 03, 2016 2:17 am

Re: UCCNC STEPCRAFT Label Making

Postby itsmiro » Mon Dec 19, 2022 9:23 am

The above video is private and it is also not available in its source. That's why its blank..
itsmiro
 
Posts: 2
Joined: Mon Dec 19, 2022 9:19 am
Location: Moscow


Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 1 guest