Milling core holes

If you milled something cool and you want to show it to others post it here.

Milling core holes

Postby CADdy » Wed Sep 08, 2021 4:19 am

Milling core holes in the clamping plate of my milling machine

Software: UCCNC Ver. 1.2113, Screen from Laki (with own adjustments and changes).
Video on YouTube:



Peter
CADdy
 
Posts: 58
Joined: Sun Sep 17, 2017 2:26 pm

Re: Milling core holes

Postby cncdrive » Wed Sep 08, 2021 6:52 am

Video is not showing.
cncdrive
Site Admin
 
Posts: 3852
Joined: Tue Aug 12, 2014 11:17 pm

Re: Milling core holes

Postby MikeM » Wed Sep 08, 2021 12:13 pm

I can see the video
MikeM
 
Posts: 14
Joined: Thu Jul 23, 2020 12:30 pm
Location: Cape Town, South Africa

Re: Milling core holes

Postby cncdrive » Thu Sep 09, 2021 8:22 am

Interestingly the video does not show on my computer but it shows and plays fine on my smart TV.
Anyways, could you please post the link just to make sure others can view it...
cncdrive
Site Admin
 
Posts: 3852
Joined: Tue Aug 12, 2014 11:17 pm

Re: Milling core holes

Postby CADdy » Fri Sep 10, 2021 9:16 am

Hi,

when I click on the link above, the video plays normally. Here again is the link to youtube:
https://youtu.be/uUTC9nRJwiY

I hope, it works ;-)

Peter
CADdy
 
Posts: 58
Joined: Sun Sep 17, 2017 2:26 pm

Re: Milling core holes

Postby spillage » Fri Sep 10, 2021 11:13 am

Thank you… the link works perfectly.
Bryan
“Simplicity is the ultimate sophistication“ Leonardo Da Vinci
spillage
 
Posts: 22
Joined: Sat Aug 01, 2020 11:07 pm

Re: Milling core holes

Postby ger21 » Sat Sep 11, 2021 4:09 am

Very strange.

I could see the video before, but today I can't? wtf??
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 2051
Joined: Sat Sep 03, 2016 2:17 am

Re: Milling core holes

Postby CADdy » Sat Sep 11, 2021 6:34 am

ger21 wrote:Very strange.

I could see the video before, but today I can't? wtf??


???
The YouTube-Link posted three above works.

Peter
CADdy
 
Posts: 58
Joined: Sun Sep 17, 2017 2:26 pm

Re: Milling core holes

Postby ger21 » Sat Sep 11, 2021 11:17 am

I know the link works, but two days ago I could see the video in the first post, and now it's just a blank white square.
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 2051
Joined: Sat Sep 03, 2016 2:17 am

Re: Milling core holes

Postby tau » Sat Sep 11, 2021 3:13 pm

ger21 wrote:...and now it's just a blank white square.

Welcome to the club! :mrgreen:
tau
 
Posts: 18
Joined: Sun Feb 26, 2017 8:06 pm


Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 1 guest