Step Jog question

If you have a question about the software please ask it here.

Re: Step Jog question

Postby ger21 » Sun Nov 12, 2017 4:46 pm

Also, I'd disable the pre-complie macro option. You really won't notice any difference in operation, and the screen will load a lot faster.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Step Jog question

Postby spumco » Sun Nov 12, 2017 4:58 pm

2017 Screenset
Plugin enabled - no message box
Plugin disabled - message box pops up.

Default screenset
Plugin enabled - no message box
Plugin disabled - message box pops up.

Added same message box to the destructor macro and same results on closing UCCNC.
spumco
 
Posts: 306
Joined: Mon Oct 03, 2016 10:10 pm

Re: Step Jog question

Postby ger21 » Sun Nov 12, 2017 5:18 pm

So that would confirm that the plugin is keeping the Constructor macro from running.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Step Jog question

Postby spumco » Mon Nov 13, 2017 5:10 am

VistaCNC has posted an updated plugin that is supposed to fix the G91 issue. I'll try it out tomorrow.

I've reported the problem with the constructor macro and directed them to this forum thread.

They have very politely declined to share the source code.

-Spumco
spumco
 
Posts: 306
Joined: Mon Oct 03, 2016 10:10 pm

Re: Step Jog question

Postby CT63 » Mon Nov 13, 2017 9:03 pm

Not surprised VisaCNC won't release the source code to prevent it being pirated by the Chinese. Look what happened to Mach 3.
CT63
 
Posts: 115
Joined: Sat Sep 03, 2016 11:19 pm
Location: Connecticut, USA

Re: Step Jog question

Postby Robertspark » Mon Nov 13, 2017 9:08 pm

No offence by that, you can only ask.... Also it does depend on whether they are interested in keeping it maintained code and sorted out with any development work or bugs etc.

Some companies make their money in hardware sales and selling something physical but will provide you with all the assistance possible for you to develop things. Others will try to micromanage and do everything in house
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: Step Jog question

Postby ger21 » Mon Nov 13, 2017 11:36 pm

99% of their customers want a working product out of the box. That requires them to provide both hardware and software. I wouldn't call it micromanaging.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Step Jog question

Postby CT63 » Mon Nov 13, 2017 11:41 pm

Robertspark wrote:Some companies make their money in hardware sales and selling something physical but will provide you with all the assistance possible for you to develop things. Others will try to micromanage and do everything in house


I don't think it's a question of micromanaging. In my experience it's not uncommon for companies to not release source code not only to prevent pirating but for liability reasons. UCCNC markets both hardware and software would they be willing to release their code? Just saying...
CT63
 
Posts: 115
Joined: Sat Sep 03, 2016 11:19 pm
Location: Connecticut, USA

Re: Step Jog question

Postby cncdrive » Tue Nov 14, 2017 12:18 am

In my opinion there was and always will be a contrary between open and closed source software and hardware producers and products.
I think the 2 sides could argue all day long, but will never fully agree the other party and this is mostly because the basic motivations are different.

I understand VistaCNC that they don't want to share their code.
Nowadays when Chinese copying basicly everything even that little information might be enough for copies to show up quickly flooding the market.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Step Jog question

Postby Robertspark » Tue Nov 14, 2017 6:09 pm

I was only talking about the plugin code, nothing to do with source code for the microcontroller.

An alternative could be to provide the video and PID and the usb datastrings

Think of the pendant as a device similar to a modbus device... If you have the registers you can connect to it to use its full functionality. Why would this full connection information not be viable to provide?

Liability has zero to do with it.... In this realm of DIY, plugins macros etc you have no hope of winning a liability case.
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

PreviousNext

Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 11 guests