Connecting a tool height setting

If you have a question about the software please ask it here.

Connecting a tool height setting

Postby gabi68 » Sun Jul 23, 2017 11:31 am

Hi to all,

I ma trying to connect a tool height setting device to HDBB2. I need to know what pins should I use. I attach the pro file to have a look and better understanding. I can confirm if I change some settings all are written in the .pro file (I was having some problems with that - win7 change some rights - i fix that now).

Thank you
Gabi
Attachments
XZero.pro
(30.68 KiB) Downloaded 574 times
gabi68
 
Posts: 57
Joined: Wed Dec 07, 2016 10:35 pm

Re: Connecting a tool height setting

Postby cncdrive » Sun Jul 23, 2017 1:49 pm

Since all inputs on the HDBB2 are electrically equivalent and all input pins are freely configurable to any input functions including the probe input in the UCCNC you can configure the probe input to any of the input pins.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Connecting a tool height setting

Postby gabi68 » Sun Jul 23, 2017 1:58 pm

Hi,

Thank you. A quick look on the HDBB2 manual solve the problem.

Gabi
gabi68
 
Posts: 57
Joined: Wed Dec 07, 2016 10:35 pm


Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 4 guests