Unable to activate the reset

If you have a question about the software please ask it here.

Unable to activate the reset

Postby Ian » Sat Feb 11, 2017 4:30 pm

Hello my Name is Ian

I’ve been using a UC100 with the UCCNC software on a System 45 controller from DIYCNC for quite a while now, I’ve been quite happy with the setup until recently the Z-Axis intermittently ignores the code and hence just ploughs through the job, but that’s another story!!!

I’ve now been building my own controller setup with:

UCCNC software
UC100
Benezan Mini BOB, inc. RJ45 adapters
4x Leadshine DM556 Drivers
No limit switches (for the moment)

Now my problem is I’ve been over everything and I can’t trigger the reset button, charge pump is working according to the BOB, but on the UCCNC diagnostic screen the LED is flickering.

Anyone have an idea, please.

Regards
Ian

Error.jpg
Reset Error
Setup.jpg
Setup
Ian
 
Posts: 5
Joined: Sat Feb 11, 2017 2:55 pm
Location: Switzerland

Re: Unable to activate the reset

Postby Ian » Sun Feb 12, 2017 7:19 pm

Oops how embarrassing, couldn't see the wood for the trees.

Thanks TP
Ian
 
Posts: 5
Joined: Sat Feb 11, 2017 2:55 pm
Location: Switzerland


Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 17 guests