Probing

[asuratman]

Is there any how-to-probing on utube/docs ? I got difficulties to learn probing just from "i", not too clear on how to do it. I am using 1.2112.
Thanks.

[dezsoe]

No, I still didn't have enough time to make these videos. Feel free to ask and I'll help you.

[asuratman]

Hello Deszoe
I use following probe :
https://ae01.alicdn.com/kf/HTB1QOapNXXXXXcjXVXXq6xXFXXXP/Cnc-Z-Axis-Router-Mill-Zero-Check-Touch-Plate-Mach3-Tool-Setting-Probe-Setting-Probe-Milling.jpg

Is this right to wire probe

I3 (+) --------------- Probe
I3 (-) --------------- 24V0 (PS24VDC)
Endmill ------------- 24V+ (PS24VDC)

If wiring above right, what next I should do to set probing ?

[sn4k3]

There's a macro (M31.txt) you need to edit and set probe height, then you use PROBE button on the GUI

[asuratman]

I will do it ...

[asuratman]

I use UCCNC 1.2112 and Peter P probing program.
I wire the probe tool as follow:
IX+ ---- 24V+
IX- ----- Puck (Probe)
Aligator (Endmill) ---- 24V-

I found on diagnostic screen :
Probe ---- green
I3 ---- Dark
It is opposite than it should be.

When I touch alligator to puck,
Probe ---- dark
I3 ---- Green

When I click Start Probe, nothing happen.
I must have wrong wiring or I can not the same probing program from Peter P.
Somebody can help …