MDI won’t work

If you have a question about the software please ask it here.

MDI won’t work

Postby MarioChevelle » Thu Apr 04, 2019 2:52 am

Hello everyone !!! I’m new to this forum I want to start off I’m glad I found this form. I recently purchased
UCCNC machine control software I’m familiar with the fancu control
Just can’t get nothing to move in MDI. the numbers on the screen will move but no axis will
MarioChevelle
 
Posts: 7
Joined: Thu Apr 04, 2019 2:28 am

Re: MDI won’t work

Postby ger21 » Thu Apr 04, 2019 10:49 am

Is the blue light on the controller lit up?
Have you configured the port and pin numbers for your motors?
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: MDI won’t work

Postby MarioChevelle » Thu Apr 04, 2019 12:34 pm

ger21 wrote:Is the blue light on the controller lit up?
Have you configured the port and pin numbers for your motors?

I’m not sure about the blue light I’ll check later today the only port & pin I feel I got right is for x , y , z, axis I can manually move them by just pressing the cursors on the Hidden screen all the way to the left
Where can I get information each port & pin for each functions?
So I’ll know where to start looking thanks
MarioChevelle
 
Posts: 7
Joined: Thu Apr 04, 2019 2:28 am

Re: MDI won’t work

Postby ger21 » Thu Apr 04, 2019 12:41 pm

So you can jog them with the jog buttons, but they don't move in MDI?
What are you typing in the MDI?
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: MDI won’t work

Postby MarioChevelle » Thu Apr 04, 2019 1:28 pm

ger21 wrote:So you can jog them with the jog buttons, but they don't move in MDI?
What are you typing in the MDI?

Correct !!
MarioChevelle
 
Posts: 7
Joined: Thu Apr 04, 2019 2:28 am

Re: MDI won’t work

Postby MarioChevelle » Thu Apr 04, 2019 4:18 pm

MarioChevelle wrote:
ger21 wrote:So you can jog them with the jog buttons, but they don't move in MDI?
What are you typing in the MDI?

Correct !!



Go x3 or Y2 or z3
MarioChevelle
 
Posts: 7
Joined: Thu Apr 04, 2019 2:28 am

Re: MDI won’t work

Postby ger21 » Thu Apr 04, 2019 5:52 pm

Try G0

G-Zero. not G oh
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: MDI won’t work

Postby MarioChevelle » Thu Apr 04, 2019 9:26 pm

ger21 wrote:Try G0

G-Zero. not G oh

Lol I did !!
I even tried the , insert after and nothing
MarioChevelle
 
Posts: 7
Joined: Thu Apr 04, 2019 2:28 am

Re: MDI won’t work

Postby ger21 » Thu Apr 04, 2019 11:04 pm

Sorry, I have no idea what the issue is.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: MDI won’t work

Postby laki » Fri Apr 05, 2019 1:02 am

Did you hit enter after G0 x3 or G0 Y2?
laki
 
Posts: 111
Joined: Thu Jul 19, 2018 12:46 am
Location: Belgrade, Serbia

Next

Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 5 guests