Screen Editor - how to access jog panel ??

[beefy]

I've done major page editing in the past, but have never done anything with the fly out jog panel.

Today I wanted to check the button codes (using the screen editor) on some of the jog panel buttons but could not figure out how to access it.

Normally, I press SHIFT and click on different tabs to get to different pages but this didn't work with the jog panel.

Am I missing something obvious ??

[Haik]

I just tried this... It seems all that's needed is to:
-Launch the Screen Editor
-Move it to right so that it is clear of the Jog Flyout Panel
-Click the Vertical Bar to cause the Jog Flyout Panel to appear
-Click/select as you like on the Jog Flyout Panel UI and element properties will appear within the Screen Editor.

Hope this works for you too!
- Haik

[Greolt]

I had no problem opening the jog panel while editing, my issue is I can not get to go back.

Had to exit editing mode before it would return.

[beefy]

Thanks very much Haik & Greolt.

I found out what was causing the problem. It seems UCCNC must be out of reset BEFORE the screen editor is launched.

In normal operation the jog panel will not fly out if the machine is in reset, so if you start the screen editor while UCCNC is in reset the jog fly out panel won't come out.

Keith.