I'm just in the process of setting up a DG4S-16035 driver, and I'm wondering as to the meaning of my status lights. The driver is connected to a C62 BOB and a 102V encoder. On power up, the green LED flashes a few times and then the red LED comes on solid and stays on. At this point the green LED also stays on solid. So, both LED's are lit and solid. I can't seem to find any mention of this combination in any literature. All voltages have been checked and confirmed within spec (11.98VDC from BOB and 4.95VDC to encoder) Please advise. Thank you.
-Tulsah