Taper on job

If you have a question about the software please ask it here.

Taper on job

Postby Wilky » Tue Jan 30, 2018 7:47 pm

Hi

New to Cnc lathes so a little confused as to why a job we are doing has been fine until today when the job decided to taper at one end although not to much but very annoying as we have made no changes
This machine is only 5 months old

Any help would be great
Wilky
 
Posts: 2
Joined: Tue Jan 30, 2018 7:43 pm

Re: Taper on job

Postby CT63 » Tue Jan 30, 2018 9:42 pm

Is the tailstock slightly out of alignment?
CT63
 
Posts: 115
Joined: Sat Sep 03, 2016 11:19 pm
Location: Connecticut, USA

Re: Taper on job

Postby Wilky » Tue Jan 30, 2018 9:53 pm

Not sure we did have a crash on a tool reset offsets etc but taper still near tailstock
Wilky
 
Posts: 2
Joined: Tue Jan 30, 2018 7:43 pm


Return to Ask a question from support here

Who is online

Users browsing this forum: Bing [Bot], Matt and 20 guests