Hello
In 2016 I bought a Stepcraft2_Model300 and the UCCNC program, the UC100 and the license for the UC100.
I didn't really use this machine because I had other plans.
But a year ago it was functional and the UCCNC program worked well with the UC100.
A year ago I moved and I haven't used the Stepcraft since.
A few weeks ago, I reinstalled my operating system and made the updates (windows 8.1)
and I reinstalled UCCNC (ver. 1.2115) to use the Stepcraft.
The UC100 is recognized by windows and appears in device USB controllers, as USB Serial Converter.
(After automatic installation by Microsoft)
My license for the UC100 is in the UCCNC program directory but UCCNC only works in demo mode.
When I connect UC100, the green light comes on. But never the blue one, even if I connect the UC100 to the Stepcraft.
I tried to install from this link:
http://cncdrive.com/MC/UC100 full auto installer/UCx00setup.exe
following a recommendation in one of your posts in this forum.
After installing MACH3 which I don't need, I got this message before the install aborted:
"DPIns.exe does not execute on your current Operating System."
My operating system is (windows 8.1) and is up to date.
I now have more time and would like to finally take advantage of this investment I made several years ago.
Thank you in advance for your help.
Bob