Probing, Vice mounting

If you have a question about the software please ask it here.

Probing, Vice mounting

Postby Lozza50 » Fri Sep 24, 2021 3:41 am

CNC is Axiom PRO 8 . When mounting vice directly onto aluminium base probe will not work. Puck is directly connected to
Axiom. Have spent many hours looking for a solution.
Lozza50
 
Posts: 3
Joined: Fri Sep 24, 2021 3:34 am

Re: Probing, Vice mounting

Postby Delco » Sat Sep 25, 2021 10:48 am

You need a isolated touchprobe or if you are using a rod as touchoff then make it insulated from the spindle - you have a circuit going from your spindle to the bed via a earth circuit.
Delco
 
Posts: 354
Joined: Tue Apr 02, 2019 4:23 am

Re: Probing, Vice mounting

Postby Lozza50 » Tue Sep 28, 2021 2:01 am

Thanks it worked
Delco wrote:You need a isolated touchprobe or if you are using a rod as touchoff then make it insulated from the spindle - you have a circuit going from your spindle to the bed via a earth circuit.
Lozza50
 
Posts: 3
Joined: Fri Sep 24, 2021 3:34 am


Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 26 guests