How To Set UCCNC Spindle Parameters on 6040

If you have a question about the software please ask it here.

How To Set UCCNC Spindle Parameters on 6040

Postby eddiegnz1 » Wed Jul 17, 2019 4:13 am

please see attached photo of the screen in the UCCNC software. I have no idea what i'm looking at but the spindle is not spinning at all. I ran a job and it ran the full job path correctly without the spindle turning at all (i ran it in the air). the X,Y and Z all worked perfectly on this new 3-Axis 6040 (my first ever CNC)

thanks so much for your help with the spindle.

Eddie
Attachments
Spindle Parameters.JPG
eddiegnz1
 
Posts: 16
Joined: Tue Jun 11, 2019 11:38 pm

Re: How To Set UCCNC Spindle Parameters on 6040

Postby cncdrive » Wed Jul 17, 2019 4:15 am

You can download the spindle parameters (profile file) from here: viewtopic.php?f=2&t=2003
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm


Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 19 guests