Unable to change Kernel frequency

If you think you've found a bug post it here.

Unable to change Kernel frequency

Postby woffler » Sat Sep 02, 2017 1:22 am

I am having a problem with the latest version not saving the Kernel , if i try and select the 50 freq it will not save even if i close the program and restart it will however save 25 or 100 .
Any ideas thanks
woffler
 
Posts: 14
Joined: Tue May 24, 2016 5:02 pm

Re: Unable to change Kernel frequency

Postby A_Camera » Mon Sep 11, 2017 6:13 pm

Did you click on the "Save settings" button before exiting the configuration screen?
A_Camera
 
Posts: 398
Joined: Tue Sep 20, 2016 11:37 am

Re: Unable to change Kernel frequency

Postby ger21 » Mon Sep 11, 2017 10:56 pm

If you are using the 2017 Screenset, and a UC100, it's a screenset issue.
I've been traveling the last few days, and will send out an update in the next day or two that fixes it.
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 716
Joined: Sat Sep 03, 2016 2:17 am


Return to Report a bug

Who is online

Users browsing this forum: Gary Campbell and 1 guest