v.1.2105 - List object issue.

If you think you've found a bug post it here.

v.1.2105 - List object issue.

Postby kig23 » Tue Jul 17, 2018 3:17 pm

Hello,
if you click inside the list object on some of the messages the result is that the clicked line becomes black with white text, but after that when you press the clear button the black line remains. Is that the way the list object works or i'm missing something. Unfortunately I can not attach photos because I get this message (Sorry, the board attachment quota has been reached).

Thanks.
kig23
 
Posts: 158
Joined: Sat Mar 31, 2018 6:58 am
Location: Italy

Re: v.1.2105 - List object issue.

Postby kig23 » Sat Aug 04, 2018 9:08 am

Hello,
i hope Balazs will anser this post. Like i wrote, if one of list oblect messages is selected, the selected line becomes black (picture1), but after that when you press the Clear button the black line remains (picture2). There is another thing. When you have messages in the list object and scroll down (picture3) and then click the Clear button, that will clear the messages but doesn't initialize the list object on the first line (picture4) and IMHO you can lost messages if you don't pay attention to scroll up the control manually. Thank you.
Attachments
picture1.png
picture2.png
picture2.png (4.65 KiB) Viewed 9618 times
picture3.png
picture3.png (14.31 KiB) Viewed 9618 times
picture4.png
picture4.png (5.13 KiB) Viewed 9618 times
kig23
 
Posts: 158
Joined: Sat Mar 31, 2018 6:58 am
Location: Italy

Re: v.1.2105 - List object issue.

Postby cncdrive » Sun Aug 05, 2018 2:37 am

You can't loose messages, better to say that you can miss to see messages. I mean messages will not be lost just the Clear button does not scroll up and does not remove the selection mark.
I will fix this for the next release.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: v.1.2105 - List object issue.

Postby kig23 » Sun Aug 05, 2018 7:44 am

Yes, you're right. I meant that you can miss to see messages. Thanks Balazs and if it's possible to make the control transparent should be great.
kig23
 
Posts: 158
Joined: Sat Mar 31, 2018 6:58 am
Location: Italy

Re: v.1.2105 - List object issue.

Postby cncdrive » Sun Aug 05, 2018 1:36 pm

OK, I'll add a backgroundcolor and backgroundtransparency parameter.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: v.1.2105 - List object issue.

Postby kig23 » Sun Aug 05, 2018 4:31 pm

Thanks indeed. Great.
kig23
 
Posts: 158
Joined: Sat Mar 31, 2018 6:58 am
Location: Italy


Return to Report a bug

Who is online

Users browsing this forum: No registered users and 9 guests

cron