Drilling cycle problem

If you think you've found a bug post it here.

Re: Drilling cycle problem

Postby dezsoe » Tue Nov 14, 2017 2:08 pm

I wrote it because Balázs wrote he checked the NIST document, and on the link you sent there is the same text.
dezsoe
 
Posts: 198
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Drilling cycle problem

Postby Dan911 » Tue Nov 14, 2017 2:41 pm

Sorry... I use canned cycles often and know what to expect and I answered defensively.

Thanks,
Dan
Dan911
 
Posts: 124
Joined: Mon Oct 31, 2016 1:22 am
Location: USA

Re: Drilling cycle problem

Postby dezsoe » Tue Nov 14, 2017 3:06 pm

No problem! :) More than two years ago we had a longer discussion with Balázs on the sticky parameters, and I remembered that sentence, that's why it was funny for me.
dezsoe
 
Posts: 198
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Drilling cycle problem

Postby Vmax549 » Tue Nov 14, 2017 4:08 pm

Th R should be modal inside of the canned cycle (Sticky if you choose) You ONLY need to reinsert teh R value IF you need it to change. I t would be best to clear teh R value at the G80.

Just a thought, (;-) TP
Vmax549
 
Posts: 508
Joined: Sun Nov 22, 2015 3:25 am
Location: USA

Re: Drilling cycle problem

Postby Vmax549 » Tue Nov 14, 2017 4:26 pm

Just in case you need teh reference to that Here is teh Fanuc reference from a Fanuc manual.
Attachments
CannedCycleModal.jpg
Vmax549
 
Posts: 508
Joined: Sun Nov 22, 2015 3:25 am
Location: USA

Re: Drilling cycle problem

Postby Dan911 » Tue Nov 14, 2017 7:57 pm

Hi Terry,

I think since Dezsoe pointed out this is listed in NIST it will be changed.

Dan
Dan911
 
Posts: 124
Joined: Mon Oct 31, 2016 1:22 am
Location: USA

Re: Drilling cycle problem

Postby cncdrive » Thu Nov 16, 2017 10:47 am

Yes, that's good info. So, we will change the R to sticky or modal or whatever we call it. :)
cncdrive
Site Admin
 
Posts: 1331
Joined: Tue Aug 12, 2014 11:17 pm

Previous

Return to Report a bug

Who is online

Users browsing this forum: No registered users and 1 guest