Setepcraft D.420 inverted homing

If you think you've found a bug post it here.

Setepcraft D.420 inverted homing

Postby Fabien » Sun Feb 07, 2021 11:16 am

Hello,
Sometimes with a Stepcraft D.420 (with an UC100), the homing search is moving on the wrong direction (but I don't touch to the settings).
Fabien
 
Posts: 26
Joined: Fri Jun 21, 2019 8:04 am

Re: Setepcraft D.420 inverted homing

Postby cncdrive » Sun Feb 07, 2021 12:09 pm

That means that your homing switch is locked up.
cncdrive
Site Admin
 
Posts: 3626
Joined: Tue Aug 12, 2014 11:17 pm

Re: Setepcraft D.420 inverted homing

Postby Fabien » Mon Feb 22, 2021 8:00 pm

Ok thank you for the information. Is that possible to add a max distance protection because the move can continue until breaking the tool.
Fabien
 
Posts: 26
Joined: Fri Jun 21, 2019 8:04 am

Re: Setepcraft D.420 inverted homing

Postby cncdrive » Tue Feb 23, 2021 9:55 am

No, it is not possible, sorry. You should fix your home switch, because it is abnormal that it just locks up. :(
cncdrive
Site Admin
 
Posts: 3626
Joined: Tue Aug 12, 2014 11:17 pm


Return to Report a bug

Who is online

Users browsing this forum: No registered users and 1 guest