forum.cncdrive.com

Hey together,

i have a problem using spindle encoder with my axbbe using Mach4 turn.
I set the A and B Pin in the Axbbe Plugin and can also get a encoder signal in the Axbbe Diagnosticts.
But i dont know how to configure it in the Mach 4 Settings.
In the mach4 Screen there is always 0 on the encoderoutput...
i also tried to set it as an Motor using OB1 but cant get it running.

Spindle encoder is not implemented in the AXBB-E for Mach4.
That only works with the UCCNC and Mach3 at the moment.

Oh...
Is there no way to get it running?