Sorry I did a search, can't seem to find the answer.
I have a license for UCCNC to run my Grizzly G0704, I've been using it as a mill but I have a need for Mill Turning.
Where do I find the Turn Software from UCCNC?
Another question is: Is there and easy way to configure the axis to comply with a lathe setup? or is it just easier to swap the plugs?
CR
Turn Software
4 posts
• Page 1 of 1
Turn Software
by nyracerxxx » Wed Jul 24, 2024 11:05 pm
- nyracerxxx
- Posts: 5
- Joined: Wed Feb 21, 2024 12:40 am
Re: Turn Software
by cncdrive » Thu Jul 25, 2024 9:27 pm
UCCNC turn is only available in the latest development release 1.2116, you can download it from here: viewtopic.php?f=2&t=240&start=50
I don't understand your other question, please explain.
I don't understand your other question, please explain.
- cncdrive
- Site Admin
- Posts: 4851
- Joined: Tue Aug 12, 2014 11:17 pm
Re: Turn Software
by nyracerxxx » Sun Jul 28, 2024 10:15 pm
I have a mill setup with uccnc software so the z would be used instead of the X axis and X axis would be used instead on the Y axis.
- nyracerxxx
- Posts: 5
- Joined: Wed Feb 21, 2024 12:40 am
Re: Turn Software
by cncdrive » Mon Jul 29, 2024 7:44 pm
You could make 2 separate profile files for the 2 different setup.
- cncdrive
- Site Admin
- Posts: 4851
- Joined: Tue Aug 12, 2014 11:17 pm
4 posts
• Page 1 of 1
Return to UCCNC TURN (CNC Lathe)
Who is online
Users browsing this forum: No registered users and 16 guests