Fusion 360 PP

While UCCNC does not currently have a TURN Modual Here is the place to discuss your wants and wishes for TURN

Fusion 360 PP

Postby andrej » Tue Jan 09, 2024 8:55 am

What is the recommended postprocessor for Fusion 360 and UCCNC Turn?
andrej
 
Posts: 24
Joined: Tue Jun 07, 2022 1:56 pm
Location: Piešťany, Slovakia

Re: Fusion 360 PP

Postby fred47 » Mon Sep 09, 2024 9:09 pm

Hi
I have a same question ....
I use UCCNC software 1.2116 turn version and Fusion 360.there are a postprocessor UCCNC on Fusion galerie but for 3 axis , not for lathe........
what post processor to use?

Is an update coming soon?

Fred
fred47
 
Posts: 7
Joined: Mon Dec 04, 2023 5:53 pm
Location: France

Re: Fusion 360 PP

Postby Arne9999 » Tue Sep 24, 2024 6:14 am

I'm using Fanuc in Fusion 360. I've just started, but so far so good (after changing the code to diameter instead of radius...). However, as I mentioned in another post, it moves at the same speed regardless of the operation. So if I set a feed rate of 150mm/min during a cut, it will travel at this speed throughout the entire process... very annoying.
Arne9999
 
Posts: 10
Joined: Sat Jan 27, 2024 6:21 pm


Return to UCCNC TURN (CNC Lathe)

Who is online

Users browsing this forum: No registered users and 1 guest