Warning: Unknown g-codes in program

Post anything you want to discuss with others about the software.

Warning: Unknown g-codes in program

Postby cnesan » Mon Jun 05, 2017 10:01 pm

Hi to all of the forum,

When loading some gcode files, at the machining startup a form opens with the message in question.

UCCNC produces by accident a LOG file where you can check the unknown command?
cnesan
 
Posts: 16
Joined: Sat May 20, 2017 10:55 am

Re: Warning: Unknown g-codes in program

Postby cnesan » Tue Jun 06, 2017 4:46 am

I found the code unknown. This is the G21 command defined as (METRIC MODE).

I claim that the file in question is generated by "PCB gCode" by Eagles.

Do I just remove it or do I have to change the "PCB g-Code" setup?

Thank you all for reading
cnesan
 
Posts: 16
Joined: Sat May 20, 2017 10:55 am

Re: Warning: Unknown g-codes in program

Postby dezsoe » Tue Jun 06, 2017 7:59 am

You can ignore it. UCCNC will skip this code.
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary


Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 9 guests