1.2112 screenset

Post anything you want to discuss with others about the software.

Re: 1.2112 screenset

Postby NikolayUA24 » Tue Oct 08, 2019 7:38 am

cncdrive wrote:OK, then I know that deleting the texture with OpenGL is the problem. I just have to figure out why and how to further debug this. This particular code is not easy. Will have to think about it a bit...

You try to keep everything as it is. Video card: compatible with OpenGL 1.3
I have a controller of the Russian manufacturer, there are requirements. Video card: OpenGL 4.5
Such cards are expensive. And on laptops it works poorly, constantly losing communication.
I use Google Translator.
NikolayUA24
 
Posts: 83
Joined: Tue Mar 20, 2018 2:50 pm
Location: Ukraine

Re: 1.2112 screenset

Postby cncdrive » Tue Oct 08, 2019 8:22 am

Yes, we keep the 1.3 OpenGL, will not use newer.

Can you please try the attached exe if the crashes?
Also if it not crashing then test if the slider is working ok?
Attachments
UCCNC.zip
(1.57 MiB) Downloaded 172 times
cncdrive
Site Admin
 
Posts: 3447
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2112 screenset

Postby NikolayUA24 » Tue Oct 08, 2019 8:32 am

cncdrive wrote:Yes, we keep the 1.3 OpenGL, will not use newer.

Can you please try the attached exe if the crashes?
Also if it not crashing then test if the slider is working ok?

Crashes
Attachments
1.jpg
I use Google Translator.
NikolayUA24
 
Posts: 83
Joined: Tue Mar 20, 2018 2:50 pm
Location: Ukraine

Re: 1.2112 screenset

Postby cncdrive » Tue Oct 08, 2019 8:39 am

OK, and this one?
Attachments
UCCNC.zip
(1.57 MiB) Downloaded 169 times
cncdrive
Site Admin
 
Posts: 3447
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2112 screenset

Postby NikolayUA24 » Tue Oct 08, 2019 8:50 am

cncdrive wrote:OK, and this one?

Crashes
Attachments
1.jpg
I use Google Translator.
NikolayUA24
 
Posts: 83
Joined: Tue Mar 20, 2018 2:50 pm
Location: Ukraine

Re: 1.2112 screenset

Postby cncdrive » Tue Oct 08, 2019 9:17 am

Do you get a messagebox before the crash with this one?
If so plz make a printscreen.
Attachments
UCCNC.zip
(1.64 MiB) Downloaded 169 times
cncdrive
Site Admin
 
Posts: 3447
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2112 screenset

Postby NikolayUA24 » Tue Oct 08, 2019 10:25 am

cncdrive wrote:Do you get a messagebox before the crash with this one?
If so plz make a printscreen.

I made a GIF animation.
Crashes
Attachments
GIF animation.zip
(1 MiB) Downloaded 171 times
I use Google Translator.
NikolayUA24
 
Posts: 83
Joined: Tue Mar 20, 2018 2:50 pm
Location: Ukraine

Re: 1.2112 screenset

Postby ger21 » Tue Oct 08, 2019 11:11 am

Delco wrote:I have also experienced a problem where the spindle doesnt automatically turn off on a toolchange , I need to manually turn spindle on then off to make it go off - I assume its something to do with the HYwin14 plugin ?


You either need an M5 before the M6 (preferred method), or have the M6 macro stop your spindle. Dan's plugin has nothing to do with tool changes.
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 1845
Joined: Sat Sep 03, 2016 2:17 am

Re: 1.2112 screenset

Postby cncdrive » Tue Oct 08, 2019 12:30 pm

Try this please for crash.
Attachments
UCCNC.zip
(1.65 MiB) Downloaded 156 times
cncdrive
Site Admin
 
Posts: 3447
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2112 screenset

Postby cncdrive » Tue Oct 08, 2019 1:03 pm

Made a mistake in the previous exe, please test this one...
Attachments
UCCNC.zip
(1.64 MiB) Downloaded 171 times
cncdrive
Site Admin
 
Posts: 3447
Joined: Tue Aug 12, 2014 11:17 pm

PreviousNext

Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: Google [Bot] and 8 guests

cron