1.2112 screenset

Post anything you want to discuss with others about the software.

Re: 1.2112 screenset

Postby dezsoe » Tue Oct 08, 2019 5:05 am

The probe button on the main screen calls the M31.txt macro, so it's independent from the probe screen.

:) It was yesterday when I first thought of making apply and save buttons. I was also thinking about using the same apply and save as all the otuher settings.

Normally, you should have M5 in your g-code to stop the spindle.
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: 1.2112 screenset

Postby NikolayUA24 » Tue Oct 08, 2019 6:09 am

cncdrive wrote:Nikolay,

I'm trying to figure out what the issue is all day long, but see no problem at all in the code. :(
So, I've made a new exe file. Could you please make the screenset file as the original, I mean the slider and also the addfieldtext is back, so it will crash,
but I've put a number of MessageBoxes into this exe and would like to know what do you see on them and it is also interesting to see at which point will is crash.

Changed all the files to the original. And threw your file. The result in the photo.
Attachments
1028.jpg
1025.jpg
1024.jpg
1023.jpg
1022.jpg
1021.jpg
I use Google Translator.
NikolayUA24
 
Posts: 101
Joined: Tue Mar 20, 2018 2:50 pm
Location: Ukraine

Re: 1.2112 screenset

Postby cncdrive » Tue Oct 08, 2019 6:27 am

Thanks.
Then the issue is not where I was looking all day long. :(
I mean it runs through all 5 steps I've placed, so it finishes the slider value update without crashing.

I've made again a new exe, now I removed the redraw event of the slider image to see if it crashes there.
Could you please test this, I only want to see if it crashes or not. Attached the exe file.
Attachments
UCCNC.zip
(1.64 MiB) Downloaded 453 times
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2112 screenset

Postby NikolayUA24 » Tue Oct 08, 2019 6:58 am

cncdrive wrote:Thanks.
Then the issue is not where I was looking all day long. :(
I mean it runs through all 5 steps I've placed, so it finishes the slider value update without crashing.

I've made again a new exe, now I removed the redraw event of the slider image to see if it crashes there.
Could you please test this, I only want to see if it crashes or not. Attached the exe file.

All OK
Attachments
1.jpg
I use Google Translator.
NikolayUA24
 
Posts: 101
Joined: Tue Mar 20, 2018 2:50 pm
Location: Ukraine

Re: 1.2112 screenset

Postby cncdrive » Tue Oct 08, 2019 7:01 am

OK, thanks. Then I know where the problem is, just have to figure out what it is exactly and how to fix it. :)
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2112 screenset

Postby cncdrive » Tue Oct 08, 2019 7:08 am

OK, please test this one too and let me know if it crashes?
Attachments
UCCNC.zip
(1.57 MiB) Downloaded 469 times
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2112 screenset

Postby NikolayUA24 » Tue Oct 08, 2019 7:09 am

cncdrive wrote:OK, thanks. Then I know where the problem is, just have to figure out what it is exactly and how to fix it. :)

When I click on - or + the slider is in place, it does not move.
Attachments
2003.jpg
2003.jpg (3.94 KiB) Viewed 7521 times
2002.jpg
2002.jpg (3.87 KiB) Viewed 7521 times
I use Google Translator.
NikolayUA24
 
Posts: 101
Joined: Tue Mar 20, 2018 2:50 pm
Location: Ukraine

Re: 1.2112 screenset

Postby cncdrive » Tue Oct 08, 2019 7:12 am

Yes, I know, it's not a problem that the slider is not moving now. I'm just testing a few things, with disabling some codes, that is why it is not moving, because the redraw was disabled.
Can you please test the last upload and let me know if that crashes or not?
I just want to see now when it crashes to see which exact code is causing it.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2112 screenset

Postby NikolayUA24 » Tue Oct 08, 2019 7:15 am

cncdrive wrote:OK, please test this one too and let me know if it crashes?

Everything is working. OK ;)
Attachments
1001.jpg
1000.jpg
I use Google Translator.
NikolayUA24
 
Posts: 101
Joined: Tue Mar 20, 2018 2:50 pm
Location: Ukraine

Re: 1.2112 screenset

Postby cncdrive » Tue Oct 08, 2019 7:17 am

OK, then I know that deleting the texture with OpenGL is the problem. I just have to figure out why and how to further debug this. This particular code is not easy. Will have to think about it a bit...
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

PreviousNext

Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 17 guests

cron