Relay with axbb-e to control spindle
Posted: Sun Nov 17, 2019 1:14 pmCan anyone tell me if a relay is needed to turn on and off the spindle? If so he would it be wired up?
forum.cncdrive.com
UCCNC machine control software support forum
http://www.forum.cncdrive.com/
Relay with axbb-e to control spindle
Page 1 of 1
Posted: Sun Nov 17, 2019 1:14 pmRe: Relay with axbb-e to control spindle
Posted: Sun Nov 17, 2019 2:29 pmIs this with a VFD? Which one?
Re: Relay with axbb-e to control spindle
Posted: Sun Nov 17, 2019 3:34 pmger21 wrote:Is this with a VFD? Which one?
Yes it's a ABB
Acs150-01u-09a8-2.
Could you help me understand why a relay would be wired with the home switches and the drivers by chance?
Re: Relay with axbb-e to control spindle
Posted: Mon Jan 20, 2020 6:57 pmUpdate a relay was needed. Also wired it like the manual shows a relay for the driver power.