Relay with axbb-e to control spindle

This Section is for users to discuss hardware

Relay with axbb-e to control spindle

Postby Stock3000gt » Sun Nov 17, 2019 1:14 pm

Can anyone tell me if a relay is needed to turn on and off the spindle? If so he would it be wired up?
Stock3000gt
 
Posts: 23
Joined: Wed Nov 13, 2019 6:16 am

Re: Relay with axbb-e to control spindle

Postby ger21 » Sun Nov 17, 2019 2:29 pm

Is this with a VFD? Which one?
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Relay with axbb-e to control spindle

Postby Stock3000gt » Sun Nov 17, 2019 3:34 pm

ger21 wrote:Is this with a VFD? Which one?

Yes it's a ABB
Acs150-01u-09a8-2.

Could you help me understand why a relay would be wired with the home switches and the drivers by chance?
Stock3000gt
 
Posts: 23
Joined: Wed Nov 13, 2019 6:16 am

Re: Relay with axbb-e to control spindle

Postby Stock3000gt » Mon Jan 20, 2020 6:57 pm

Update a relay was needed. Also wired it like the manual shows a relay for the driver power.
Stock3000gt
 
Posts: 23
Joined: Wed Nov 13, 2019 6:16 am


Return to Hardware

Who is online

Users browsing this forum: No registered users and 20 guests

cron