UCR201 Region USA Will Not Connect

This Section is for users to discuss hardware

UCR201 Region USA Will Not Connect

Postby epracefan@gmail.com » Sun Oct 13, 2019 12:05 pm

Good Morning,

I just received the UCR201 from CNC4PC.com and am testing it with UCCNC in demo mode. The unit seems to work fine with RF region set to Europe, but when I switch to USA, connection to the pendant drops and it will not reconnect. I tried all 8 RF channels with no luck and could find no special instructions for switching regions in the user's manual. The USB transmitter module has a green light and I have closed and restarted UCCNC. Am I missing something?

Ed
epracefan@gmail.com
 
Posts: 37
Joined: Wed Feb 08, 2017 8:35 pm

Re: UCR201 Region USA Will Not Connect

Postby epracefan@gmail.com » Sun Oct 13, 2019 12:15 pm

Never mind. I found the bootloader instructions for changing region/channel.

Ed
epracefan@gmail.com
 
Posts: 37
Joined: Wed Feb 08, 2017 8:35 pm


Return to Hardware

Who is online

Users browsing this forum: No registered users and 16 guests