Hi Guys,
I have a new AXBB-E and enable code. Installed software 1.2111 on a Win10 machine.
I have tried,
Connection using a fixed IP direct cable.
Connection using dynamic IP via router.
I can ping the unit on 10.10.10.0 and get a reply but the UCxxx utility only reports "UCxx Device was not found"
Tried a couple of different cables and rewired one to changeover... still no connection.
The license file is in the root of the UCCNC directory.
but when the software is opened it only ever goes into demo mode.
I've tried powering with dedicated 5V and 24V bench power supplies.
Any ideas? thanks, J.