HDBB2 with tool sensor

This Section is for users to discuss hardware

HDBB2 with tool sensor

Postby Kivlow » Wed Jan 23, 2019 4:05 pm

Hello
I buy :

https://www.aliexpress.com/item/High-pr ... 4ea2ztXkbn

How to connect it to hdbb2 (uc300eth)
I cant find any method.
I don't want to breake something.
Kivlow
 
Posts: 10
Joined: Fri Jan 11, 2019 7:18 am

Re: HDBB2 with tool sensor

Postby dezsoe » Wed Jan 23, 2019 4:54 pm

Using the pictures on the aliexpress page, connect 12Vout to brown, input+ to green and input- to PGND for the sensor, on an other input connect 12Vout to white, input+ to yellow and input- to PGND. The first will be the tool sensor, the second the overtravel signal. You can set the overtravel signal to one of the axes as limit switch, so the machine will stop if tool is pushed into the probe.
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary


Return to Hardware

Who is online

Users browsing this forum: No registered users and 3 guests

cron