UCR201 F buttons

This Section is for users to discuss hardware

Re: UCR201 F buttons

Postby George M » Fri Nov 24, 2023 2:18 pm

Any progress on this?
Thank you
George M

DIY CNC Machine
UCCNC
UC300eth-LPT5
UCBB
George M
 
Posts: 52
Joined: Mon Apr 29, 2019 6:49 pm

Re: UCR201 F buttons

Postby ger21 » Mon Nov 27, 2023 11:55 am

CNC Drive is going to look into it this week.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2642
Joined: Sat Sep 03, 2016 2:17 am

Re: UCR201 F buttons

Postby George M » Sat Dec 09, 2023 1:41 pm

Any progress on this?
Thank you
George M

DIY CNC Machine
UCCNC
UC300eth-LPT5
UCBB
George M
 
Posts: 52
Joined: Mon Apr 29, 2019 6:49 pm

Re: UCR201 F buttons

Postby ger21 » Sat Dec 09, 2023 3:50 pm

CNC Drive was able to duplicate the problem, and he's now searching for the cause.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2642
Joined: Sat Sep 03, 2016 2:17 am

Re: UCR201 F buttons

Postby George M » Tue Feb 06, 2024 3:13 pm

Has CNC Drive ever corrected this?
Thank you
George M

DIY CNC Machine
UCCNC
UC300eth-LPT5
UCBB
George M
 
Posts: 52
Joined: Mon Apr 29, 2019 6:49 pm

Re: UCR201 F buttons

Postby ger21 » Tue Feb 06, 2024 6:38 pm

He did tell me how to possibly work around it, but I've been busy and didn't get to it. I'll see if I can get you a new plugin to try in a day or two.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2642
Joined: Sat Sep 03, 2016 2:17 am

Re: UCR201 F buttons

Postby George M » Wed Feb 07, 2024 2:21 pm

No hurry.
I thought it was something they had to fix. I'm fine with v15 til then.
Thank you
George M

DIY CNC Machine
UCCNC
UC300eth-LPT5
UCBB
George M
 
Posts: 52
Joined: Mon Apr 29, 2019 6:49 pm

Re: UCR201 F buttons

Postby ger21 » Sun Feb 18, 2024 11:12 pm

George, I have a much simpler workaround, that I did not think of until today.
I created simple macros that call the onscreen buttons, and you can control the macros with your pendant buttons.
Use macro M20671 for button 10671.
And macro M20672 for button 20672.

This should work as you want.
Please revert to the original 2022 plugin.
Attachments
M20672.txt
(27 Bytes) Downloaded 8 times
M20671.txt
(27 Bytes) Downloaded 8 times
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2642
Joined: Sat Sep 03, 2016 2:17 am

Re: UCR201 F buttons

Postby George M » Mon Feb 19, 2024 1:58 pm

Thanks Ger,
But what if I want to use the other F buttons. With the new plugin I am using F4 and F5 for different parking spots.
With the new plugin I can do that.
Thank you
George M

DIY CNC Machine
UCCNC
UC300eth-LPT5
UCBB
George M
 
Posts: 52
Joined: Mon Apr 29, 2019 6:49 pm

Re: UCR201 F buttons

Postby ger21 » Mon Feb 19, 2024 2:34 pm

Just make a new macro for each button. It's only one line of code, with the screen button number in it.
You said there were some issues with the new plugin?
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2642
Joined: Sat Sep 03, 2016 2:17 am

PreviousNext

Return to Hardware

Who is online

Users browsing this forum: No registered users and 6 guests