Recommend a BOB for the UC400ETH

This Section is for users to discuss hardware

Re: Recommend a BOB for the UC400ETH

Postby Battwell » Fri Jun 28, 2019 11:59 am

id just use axbb-e now too. get the machine making money- you will pay for the axbb in a day!
although every 400eth ive put in peoples machines has just used the £4 chinese break out boards and has worked fine.
i also used 3 of them in my rye conversion on uc300 eth
isolated inputs etc and analogue 0-10v from pwm.

to be fair. ive used cncdrive break out boards on other machines and they are much easier-- much nicer to work with!
Uc300eth on router and mill
If they say it can't be done- I find a way!
Battwell
 
Posts: 459
Joined: Sun Sep 25, 2016 7:39 pm
Location: South Wales. Uk

Re: Recommend a BOB for the UC400ETH

Postby 1JUMPER10 » Fri Jun 28, 2019 7:56 pm

Thanks for all the advice. I ordered an AXBB-E. Lot of truth to what Robertspark posted.
1JUMPER10
 
Posts: 64
Joined: Tue Oct 04, 2016 1:54 am

Previous

Return to Hardware

Who is online

Users browsing this forum: No registered users and 1 guest